{
  "model": "ZJLY08-BX-07",
  "date": "2026-10-04",
  "connections": [
    {
      "id": "THR",
      "name": "Throttle sensor",
      "controller": "3-wire throttle socket",
      "colors": "Red / white / gray*",
      "other": "Throttle: 3-wire branch",
      "otherColors": "Red / black / white mentioned*",
      "status": "documented",
      "time": 1434,
      "source": "video-supplier",
      "note": "The destination is supported, but the color descriptions disagree: the supplier lists red/white/gray; Venom's captions mention red/white/brown at 21:37 and red/black/white at 24:13. Identify this branch by tracing the cable from the grip. No individual supply, ground or signal pin is assigned here."
    },
    {
      "id": "LSW",
      "name": "Throttle light button",
      "controller": "2-pin plug with red leads",
      "colors": "Red leads; doubled red visible",
      "other": "Throttle: 2-wire branch",
      "otherColors": "Yellow / brown",
      "status": "documented",
      "time": 1289,
      "source": "video-supplier",
      "note": "Venom pairs yellow/brown with the red-wire plug at 21:29 and reconnects it at 25:09. The supplier describes three red/pink conductors in this lighting group. Keep the existing doubled conductor; do not recreate its internal splice from this drawing."
    },
    {
      "id": "AUX",
      "name": "Accessory harness feed",
      "controller": "Small 2-wire accessory plug",
      "colors": "Green / black",
      "other": "Horn/accessory harness input",
      "otherColors": "Red / black",
      "status": "documented",
      "time": 1546,
      "source": "video-supplier",
      "note": "Venom explicitly pairs green/black with red/black. The supplier identifies this controller output as 48 V accessories. This is a pack-voltage accessory circuit; connector cavity order is not documented here."
    },
    {
      "id": "HEAD",
      "name": "Headlight",
      "controller": "3-pin lighting plug",
      "colors": "Red + red / green / black",
      "other": "Front lamp lead",
      "otherColors": "Blue / white / green",
      "status": "documented",
      "time": 660,
      "source": "video-supplier",
      "note": "Venom identifies this pair during removal at 11:00 and reassembly at 42:30. Two red conductors share a position; this is not a four-pin assignment. The reference photograph shows this distinctive group, but its existing mating cable has not been traced. The pictured pairing is not a verified example."
    },
    {
      "id": "TAIL",
      "name": "Tail / brake lamp",
      "controller": "3-wire lighting plug",
      "colors": "Yellow / red / green",
      "other": "Rear lamp extension",
      "otherColors": "Blue / white / green",
      "status": "documented",
      "time": 1233,
      "source": "video-supplier",
      "note": "Venom describes the rear-light pairing at 20:33–20:51. Front and rear lamp-side colors can be the same, so identify them by cable destination and controller-side color group."
    },
    {
      "id": "KEY",
      "name": "Key switch",
      "controller": "2-wire ignition plug",
      "colors": "Blue / orange",
      "other": "Original key-switch lead",
      "otherColors": "Mating lead colors not resolved",
      "status": "documented",
      "time": 1049,
      "source": "video-supplier",
      "note": "Both the supplier and Venom identify blue/orange as the ignition connection. The video refers to a green plug at the body and a square plug with orange at reassembly. Do not infer pin order from housing color."
    },
    {
      "id": "BRA",
      "name": "Brake cutoff A",
      "controller": "2-wire brake plug",
      "colors": "Purple / black",
      "other": "One brake-lever switch",
      "otherColors": "Green lead(s) shown in video",
      "status": "documented",
      "time": 1006,
      "source": "video-supplier",
      "note": "There are two purple/black cutoff connectors. The video does not establish which is left and which is right. Retain both brake-switch circuits; this drawing does not specify their switch logic."
    },
    {
      "id": "BRB",
      "name": "Brake cutoff B",
      "controller": "Second 2-wire brake plug",
      "colors": "Purple / black",
      "other": "Other brake-lever switch",
      "otherColors": "Left/right assignment unresolved",
      "status": "documented",
      "time": 1476,
      "source": "video-supplier",
      "note": "The second purple/black pair connects to the other brake-lever switch. The exact mating lead colors and left/right assignment need tracing on this machine."
    },
    {
      "id": "RSP",
      "name": "R / S / P governor",
      "controller": "5-wire control connector",
      "colors": "Black / red / yellow / green / blue",
      "other": "Factory three-knob governor",
      "otherColors": "Response / speed / power",
      "status": "documented",
      "source": "supplier",
      "note": "The model-specific supplier assigns this five-wire group to the three potentiometers. Count populated wires rather than assuming every cavity is occupied. Individual potentiometer terminals are not mapped."
    },
    {
      "id": "BAT",
      "name": "Battery input",
      "controller": "Large power connector",
      "colors": "THICK red / black",
      "other": "Original fused 48 V battery loom",
      "otherColors": "THICK red / black",
      "status": "documented",
      "time": 1558,
      "source": "video-supplier",
      "note": "This is the main battery input, distinguishable by its thick conductors and large connector. Preserve the original battery box, fuse and charging arrangement."
    },
    {
      "id": "MOT",
      "name": "Motor power via direction switch",
      "controller": "Large motor-output connector",
      "colors": "THICK blue / green",
      "other": "F / N / R switch → motor",
      "otherColors": "Existing heavy-wire assembly",
      "status": "documented",
      "time": 1570,
      "source": "video-supplier",
      "note": "Venom connects this pair to the gear-selector harness; the supplier agrees. The selector's screw-terminal arrangement and internal reversing contacts are not established. Keep its original heavy-wire assembly intact."
    },
    {
      "id": "RED",
      "name": "Separate controller red lead",
      "controller": "Single thin red lead",
      "colors": "Red; separate from battery pair",
      "other": "Shared brown/red plug in video",
      "otherColors": "Then a red/black mating plug",
      "status": "unresolved",
      "time": 1166,
      "source": "video",
      "note": "At 19:26 the housing remains with the ATV; at 22:06 the controller's red terminal is removed from it, then reinserted at 22:54. Its circuit function and cavity are not identified. This is not evidence that it should connect to the throttle's single-wire display lead. Do not depin or bridge it using this reconstruction."
    },
    {
      "id": "DISP",
      "name": "Throttle's third / display branch",
      "controller": "Accessory harness branch — inferred",
      "colors": "Exact plug and wire color unresolved",
      "other": "Throttle: single-wire branch",
      "otherColors": "Likely battery-indicator feed",
      "status": "inferred",
      "time": 1077,
      "source": "video-photo",
      "note": "The OEM throttle photograph shows a third, single-wire connector. Venom describes an additional throttle power connection and says the accessory harness serves the display. The likely destination is that harness, but the transcript never establishes the exact mating plug or cavity. Keep this route dashed until traced."
    },
    {
      "id": "HBTN",
      "name": "Horn button branch",
      "controller": "Horn/accessory loom — inferred",
      "colors": "Red / gray is a candidate pair",
      "other": "Handlebar horn button",
      "otherColors": "Trace the button cable",
      "status": "inferred",
      "source": "photo",
      "note": "OEM photos show a two-wire horn button and an accessory loom with red/gray and red/black branches. Red/gray is a plausible switch branch, not a verified assignment. With battery and both ends disconnected, continuity tracing can identify which branch reaches the horn terminal and which reaches the supply splice."
    },
    {
      "id": "HORN",
      "name": "Horn itself",
      "controller": "Two spade leads on accessory loom",
      "colors": "Black / gray in OEM photograph",
      "other": "Two terminals on horn",
      "otherColors": "Polarity not assigned",
      "status": "documented",
      "source": "photo",
      "note": "The horn has two spade connections. The multiple white plugs belong to the accessory loom. The photo establishes the physical two-wire spur, not the horn's terminal polarity or every internal splice."
    }
  ],
  "scope": "Connector-level reconstruction; no pin order. Not electrically verified. Preserve uncertainty and citations.",
  "url": "https://yaco.me/venom-controller/",
  "video": "https://www.youtube.com/watch?v=wnE1Rug8SrM",
  "supplier": "https://www.motoquadelec.com/controleur-mini-quad-36v-48v/213-variateur-controleur-quad-48v-1300w-40a.html",
  "license": "CC BY 4.0 for original text, diagrams and dataset only; photographs and third-party material excluded."
}